zsa_qmk_firmware/keyboards/facew

FaceW

A 60% no frills keyboard.

The FaceW is a special run of the WKL B.Face sourced from Sprit that doesn’t have underglow RGB LEDs but does have in switch LEDs. Also unlike the B.Face, it is based on ps2avru instead of ps2avrGB. It is designed and manufactured in Korea.

Keyboard Maintainer: MechMerlin
Hardware Supported: FaceW Sprit Edition PCB
Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1352

Make example for this keyboard (after setting up your build environment):

make facew:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: To put the FaceW into reset, hold q (K01) while plugging in.

Windows: 1. Download HIDBootFlash. 2. Place your keyboard into reset. 3. Press the Find Device button and ensure that your keyboard is found. 4. Press the Open .hex File button and locate the .hex file you created. 5. Press the Flash Device button and wait for the process to complete.

macOS: 1. Install homebrew by typing the following:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" 2. Install crosspack-avr.
brew cask install crosspack-avr 3. Install the following packages: ``` brew install python3 pip3 install pyusb brew install –HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb

4. Place your keyboard into reset.
5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.