melissa/zsa_qmk_firmware
1
0
Fork 0
mirror of https://github.com/zsa/qmk_firmware.git synced 2026-02-02 10:37:24 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
dedffb5f6dcf3519f787692aca69851cb4049708
zsa_qmk_firmware/keyboards/5x5
History
wanleg 2fcfd5cff7 Keymap: Wanleg updates (#3794) 
* various edits and minor additions

* updates

* updates

* updates

* lets_split LEDs off instructions

* lets_split LEDs off instructions

* turn off lets_split LEDs in userspace

* one-hand setup for right side
2018-08-30 09:34:14 -07:00
..
keymaps/default
Keyboard: add 5x5 board support (#3694)
2018-08-19 13:18:19 -07:00
5x5.c
Keyboard: add 5x5 board support (#3694)
2018-08-19 13:18:19 -07:00
5x5.h
Keyboard: add 5x5 board support (#3694)
2018-08-19 13:18:19 -07:00
config.h
Keyboard: add 5x5 board support (#3694)
2018-08-19 13:18:19 -07:00
readme.md
Keyboard: add 5x5 board support (#3694)
2018-08-19 13:18:19 -07:00
rules.mk
Keymap: Wanleg updates (#3794)
2018-08-30 09:34:14 -07:00

readme.md

5x5

5x5

Modular Keypad/Keyboard
The basic unit is a 5x5 matrix with 25 keys. Up to 3 of these can be connected to each other side by side.
5x5, 5x10, and 5x15 matrices are possible.
There are pads for header pins on each side that complete the circuits from board to board. These can be permanently connected with solder bridges or temporarily with pin headers and shunt jumpers.
All configurations are powered by a SINGLE Arduino Micro or clone (NOT a Pro Micro).

Keyboard Maintainer: QMK Community
Hardware Supported: 5x5 PCB
Hardware Availability: 5x5 project on 40% Keyboards

Make example for this keyboard (after setting up your build environment):

make 5x5:default

See build environment setup then the make instructions for more information.
First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.