%KEYBOARD%
A short description of the keyboard/project
Keyboard Maintainer: %YOUR_NAME%
Hardware Supported: The PCBs, controllers supported
Hardware Availability: links to where you can find this hardware
Make example for this keyboard (after setting up your build environment):
make %KEYBOARD%:defaultFlashing
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
Reset Key: Hold down the key located at
K00, commonly programmed as Esc while plugging
in the keyboard.
Windows: 1. Download HIDBootFlash. 2.
Place your keyboard into reset. 3. Press the Find Device
button and ensure that your keyboard is found. 4. Press the
Open .hex File button and locate the .hex file
you created. 5. Press the Flash Device button and wait for
the process to complete.
macOS: 1. Install homebrew by typing the following:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
2. Install crosspack-avr.
brew cask install crosspack-avr 3. Install the following
packages:
brew install python3 pip3 install pyusb brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
4. Place your keyboard into reset. 5. Flash the board by typing
bootloadHID -r followed by the path to your
.hex file.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.