melissa/zsa_qmk_firmware
1
0
Fork 0
mirror of https://github.com/zsa/qmk_firmware.git synced 2026-02-03 02:57:19 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
27f0ba6fc30db478fbab0b952bf2c3137f5a7719
zsa_qmk_firmware/Projects
History
Dean Camera 27f0ba6fc3 Fixed device state not being reset back to the default state if the host sets the address to 0x00. 
Fixed Set Configuration requests not being stalled until the host has set the device's address.

Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte read (thanks to Andrei Krainev).
2010-05-04 10:07:22 +00:00
..
AVRISP-MKII
Fixed device state not being reset back to the default state if the host sets the address to 0x00.
2010-05-04 10:07:22 +00:00
Benito
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
2010-04-28 08:15:16 +00:00
Incomplete
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
2010-04-28 08:15:16 +00:00
LEDNotifier
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
2010-04-28 08:15:16 +00:00
Magstripe
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
2010-04-28 08:15:16 +00:00
MissileLauncher
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
2010-04-28 08:15:16 +00:00
RelayBoard
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
2010-04-28 08:15:16 +00:00
TemperatureDataLogger
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
2010-04-28 08:15:16 +00:00
USBtoSerial
Change AVRISP project's timeout to be interrupt based again, but make the interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code.
2010-05-02 05:16:34 +00:00
Webserver
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
2010-04-28 08:15:16 +00:00
XPLAINBridge
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
2010-04-28 08:15:16 +00:00
makefile
Added new Relay Controller Board project (thanks to OBinou).
2010-03-24 08:06:23 +00:00