keyboards/lets_split/keymaps/OLED_sample/readme.md

SSD1306 OLED Display via I2C
======

Features
--------

Some features supported by the firmware:


* I2C connection between the two halves is required as the OLED display will use this connection as well. Note this
  requires pull-up resistors on the data and clock lines.
* OLED display will connect from either side


Wiring
------


Work in progress...


OLED Configuration
-------------------------------

Work in progress...
Add files via upload 2017-03-22 15:14:33 -04:00			`SSD1306 OLED Display via I2C`
			`======`

			`Features`
			`--------`

			`Some features supported by the firmware:`


			`* I2C connection between the two halves is required as the OLED display will use this connection as well. Note this`
			`requires pull-up resistors on the data and clock lines.`
			`* OLED display will connect from either side`


			`Wiring`
			`------`


			`Work in progress...`


			`OLED Configuration`
			`-------------------------------`

Update readme.md 2017-03-22 15:56:45 -04:00			`Work in progress...`