zsa_qmk_firmware/quantum/split_common/split_util.h

#pragma once

#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>

#include "matrix.h"

extern volatile bool isLeftHand;

void matrix_master_OLED_init(void);
void split_pre_init(void);
void split_post_init(void);

bool transport_master_if_connected(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]);
bool is_transport_connected(void);
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting. 2019-01-18 04:08:14 +10:00			`#pragma once`
Lets split eh (#3120) * Line ending stuff again * Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C) * Added personal keymap, updated some of the EH files * Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional * Added split code from lets_split, removed pro micro imports and LED code THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT * Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now * Updated eh.c * More rework of the I2C code, added global flags for split boards. * Introduced RGB over I2C, having weird edge case issues at the moment though * Fixed weird I2C edgecase with RGB, although still would like to track down route cause.. * Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C * Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed. - Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix - Split keyboard files placed into quantum/split_common/ - Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand - Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed * Updated documentation for the new makefile options and #defines specific to split keyboards * Added a bit more info to docs, so people aren't confused * Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder * Removed some debugging from eh.c * Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap). * Added a README file to the Let's Split Eh? * Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c * Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions. * Fixed lets_split_eh not having a default version * Removed "eh" references from lets_split folder for now * Took lets_split folder from master to fix travis build errors, weird my local was overriding. * Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others * Removed rules.mk from my lets_split keymap, not needed * Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN" 2018-07-16 19:25:02 -07:00
			`#include <stdbool.h>`
			`#include <stdint.h>`
			`#include <stdio.h>`
			`#include <stdlib.h>`

Make solo half of split keyboards (more) usable. (#13523) * Make solo half of split keyboards (more) usable. Using only one half of a split keyboard (that's using the split_common framework to communicate) is not a great experience, since several read timeouts per scan cycle cause an unusably slow scan rate. This change blocks all split communication attempts for 500 ms (configurable) after an error occurs, causing the scan rate to become at least _more_ usable, but might need some tweaking to work fully on most keyboards. One read timeout still needs to occur after the 500 ms has passed, and if that timeout isn't low enough, some scan cycles may still be too slow. * Fix lint complaint. * Require 25 consecutive comm errors to see comms as disconnected. The number of max errors can be overridden by defining `SPLIT_MAX_CONNECTION_ERRORS`. * Add comments to new defines, and ability to disable disconnection check. Also increase `SPLIT_MAX_CONNECTION_ERRORS` to 40, since it's divisible by most relevant numbers for the description. * Make lint happy ...again * Only update `connection_check_timer` when needed. * Add new defines to split keyboard documentation. * Move connection timeout logic to transport.c, add `is_transport_connected`. * Use split_common disconnection logic in matrix.c. Instead of doing more or less the same thing twice. * Move disconnection logic to `transport_master`. Is a cleaner implementation, and causes the scan rate while disconnected to increase instead of decrease. * Lint fixes. * Lower default `SERIAL_USART_TIMEOUT` to 20 ms. The read timeout must be low enough to not cause exessively long scan cycles when using a solo split half. 10 ms was determined from testing to work fine even with the slowest defined baudrate of 19200 (5 ms was too low for that case), so 20 ms should be fine for most cases. * Remove `SERIAL_USART_TIMEOUT` from ergodox_infinity/config.h Was somewhat mistakenly included in an earlier PR. * Fix building with `USE_I2C`. * Reduce built firmware size. Not really sure why this works, the idea was taken from tzarc's work on split disconnection. * Tweak and improve opt-out for split disconnection logic. There are now two ways to opt out from this feature: * Set `SPLIT_MAX_CONNECTION_ERRORS` to 0. This will completely disable the connection status checks (also affects the slave matrix reset logic in matrix.c, though). * Set `SPLIT_CONNECTION_CHECK_TIMEOUT` to 0. This will only disable the communication throttling while disconnected. Will make the firmware smaller. * Make split disconnection logic work with custom transports. Includes a fallback implementation for keyboards using a custom split_util.c but not a custom matrix.c (currently no such keyboard seems to be merged, though). * Remove unnecessary include of timer.h Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com> 2021-08-22 02:51:17 +02:00			`#include "matrix.h"`

Lets split eh (#3120) * Line ending stuff again * Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C) * Added personal keymap, updated some of the EH files * Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional * Added split code from lets_split, removed pro micro imports and LED code THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT * Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now * Updated eh.c * More rework of the I2C code, added global flags for split boards. * Introduced RGB over I2C, having weird edge case issues at the moment though * Fixed weird I2C edgecase with RGB, although still would like to track down route cause.. * Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C * Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed. - Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix - Split keyboard files placed into quantum/split_common/ - Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand - Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed * Updated documentation for the new makefile options and #defines specific to split keyboards * Added a bit more info to docs, so people aren't confused * Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder * Removed some debugging from eh.c * Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap). * Added a README file to the Let's Split Eh? * Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c * Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions. * Fixed lets_split_eh not having a default version * Removed "eh" references from lets_split folder for now * Took lets_split folder from master to fix travis build errors, weird my local was overriding. * Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others * Removed rules.mk from my lets_split keymap, not needed * Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN" 2018-07-16 19:25:02 -07:00			`extern volatile bool isLeftHand;`

clang-format changes 2019-08-30 11:19:03 -07:00			`void matrix_master_OLED_init(void);`
Split - Avoid race condition during matrix_init_quantum (#8235) * Avoid race condition during matrix_init_quantum * spelling is hard 2020-02-25 14:10:04 +00:00			`void split_pre_init(void);`
			`void split_post_init(void);`
Make solo half of split keyboards (more) usable. (#13523) * Make solo half of split keyboards (more) usable. Using only one half of a split keyboard (that's using the split_common framework to communicate) is not a great experience, since several read timeouts per scan cycle cause an unusably slow scan rate. This change blocks all split communication attempts for 500 ms (configurable) after an error occurs, causing the scan rate to become at least _more_ usable, but might need some tweaking to work fully on most keyboards. One read timeout still needs to occur after the 500 ms has passed, and if that timeout isn't low enough, some scan cycles may still be too slow. * Fix lint complaint. * Require 25 consecutive comm errors to see comms as disconnected. The number of max errors can be overridden by defining `SPLIT_MAX_CONNECTION_ERRORS`. * Add comments to new defines, and ability to disable disconnection check. Also increase `SPLIT_MAX_CONNECTION_ERRORS` to 40, since it's divisible by most relevant numbers for the description. * Make lint happy ...again * Only update `connection_check_timer` when needed. * Add new defines to split keyboard documentation. * Move connection timeout logic to transport.c, add `is_transport_connected`. * Use split_common disconnection logic in matrix.c. Instead of doing more or less the same thing twice. * Move disconnection logic to `transport_master`. Is a cleaner implementation, and causes the scan rate while disconnected to increase instead of decrease. * Lint fixes. * Lower default `SERIAL_USART_TIMEOUT` to 20 ms. The read timeout must be low enough to not cause exessively long scan cycles when using a solo split half. 10 ms was determined from testing to work fine even with the slowest defined baudrate of 19200 (5 ms was too low for that case), so 20 ms should be fine for most cases. * Remove `SERIAL_USART_TIMEOUT` from ergodox_infinity/config.h Was somewhat mistakenly included in an earlier PR. * Fix building with `USE_I2C`. * Reduce built firmware size. Not really sure why this works, the idea was taken from tzarc's work on split disconnection. * Tweak and improve opt-out for split disconnection logic. There are now two ways to opt out from this feature: * Set `SPLIT_MAX_CONNECTION_ERRORS` to 0. This will completely disable the connection status checks (also affects the slave matrix reset logic in matrix.c, though). * Set `SPLIT_CONNECTION_CHECK_TIMEOUT` to 0. This will only disable the communication throttling while disconnected. Will make the firmware smaller. * Make split disconnection logic work with custom transports. Includes a fallback implementation for keyboards using a custom split_util.c but not a custom matrix.c (currently no such keyboard seems to be merged, though). * Remove unnecessary include of timer.h Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com> 2021-08-22 02:51:17 +02:00
			`bool transport_master_if_connected(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]);`
			`bool is_transport_connected(void);`